Can the Curt Combo Bar C49360 Be Used as an Extender?
Question:
I see the pin hole on the front, do I drill my own on the pickup side
asked by: Jim B
Expert Reply:
The Curt Combo Bar # C49360 is generally used as a weld on receiver for custom applications on trailers, RVs, or service vehicles. I spoke with Curt and they have not tested the # C49360 as an extender, so they couldn't give me any specifications as to capacity as an extender. With that being said, I cannot recommend using it as an extender.
The Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches # C45048 may be a better option. This arrives at 34 inches long, but can also be trimmed to 24 inches. This is rated up to 6,000 pounds towing and up to 600 pounds of tongue weight at the 34 inch length, and up to 4,500 pounds towing and up to 450 pounds of tongue weight at the 24 inch length. This is also pre-drilled and powder coated to prevent corrosion.
It should also be noted that using a hitch extender will reduce your tongue weight by up to 50 percent.
Products Referenced in This Question
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
- Hitch Adapters
- Hitch Extender
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Trailers
- 24 - 34 Inch Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- 6000 lbs
- CURT
more information >
Curt Extender for 2" Hitch Receivers -18" Long
- Hitch Adapters
- Hitch Extender
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Trailers
- 18 Inch Extension
- Fits 2 Inch Hitch
- 3500 lbs
- CURT
more information >
Product Page this Question was Asked From
Curt Combo Bar with 2" Trailer Hitch Receiver - 36" Long - Unpainted
- Hitch Fabrication Parts
- Receiver Tube
- 36 Inch Long
- Raw Finish
- Fits 2 Inch Hitch
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
- Shop: Tow Ready Combo Bar with 2" Trailer Hitch Receiver - 48" Long - Raw Finish
- Shop: Lock N Roll Articulating Coupler with 30" Extension - 2" Receivers - Trailer Side - 11K
- Shop: Lock N Roll Articulating Hitch w/ 3-Position Channel - 2" Receivers - Vehicle Side - 11K
- Shop: Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side - 11,000 lbs
- Shop: Lock N Roll Articulating Coupler - Adjustable Channel Mount - Trailer Side - 11K
- Search Results: lock and roll
- Shop: Suspension Enhancement
- Search Results: 2 inch receiver tube
- Search Results: hitch pin
- Shop: Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long
- Video: Master Lock Pivot Lock Hitch Pin Review
- Video: Master Lock Hitch Pins and Clips - Standard Hitch Pin - ML1465DAT Review
- Shop: Trailer Hitch
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Search Results: hitch extender weight distributing
- Q&A: Can I Extend My Hitch Without Using TorkLift Hitch and SuperTruss Extension
- Shop: Camper Tie-Downs
- Search Results: tongue extender
- Search Results: hitch extender
- Article: Determining Trailer Tongue Weight
- Q&A: Does Weight Distribution Lower Tongue Weight on Hitch of Tow Vehicle
- Q&A: Titan Hitch Box Extension RP45292 Fits into a Hitch with a 2-1/2 Opening
- Search Results: sway bars
- Shop: Vehicle Sway Bars
- Video: Review of Valterra RV Kitchen - Refrigerator - Housewares - A10-2618VP
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Is Bow in 3,500 lb Trailer Axle Enough Camber for Loaded and Unloaded Trailers