Replacement Cam Lock Cylinders For Global Link Door Handle Locks

Question

Question:

I have a slam latch lock that is missing the lock, what would be the easiest method for replacing? Do I need an entirely new assembly or just the lock. My keys for the other latches are the G391 keys.

asked by: John M

0

Expert Reply:

You can replace just the lock with a replacement cam lock cylinder. To have them all keyed alike you would have to order all new cam locks as they won't ship us specific key numbers but will ship us multiple locks that are keyed the same when ordered together. Just choose the "keyed alike" option from the drop down box above the "add to cart" button. I've posted below all of the different Global Link sizes so you can order the correct ones for your Global Link locking handles.

Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 7/8" Long
Item # 295-000003.

Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 1-1/8" Long
Item # 295-000004.

Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 1-3/8" Long
Item # 295-000005.

Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 1-3/4" Long
Item # 295-000077.

expert reply by: Kevin C

0

Answer 1

For a simple cam lock, you can get an old standard blade screwdriver that you don't care about messing up. Use a hammer and drive the screwdriver into the key slot, the further the better. Use a pipe wrench on the screwdriver handle, and turn. In…

view full answer...

Answer 2

You can always call a lock smith but that is not cheap. I would not try to force them to turn as you could damage the reminder of the latch housing. You will have to drill them out. Start with a small bit, like a 1/8, and work your way up to a 1/4…

view full answer...

Answer 3

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 4

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

In order to install a brake controller on a dump truck you'd first need to start with a 4-way trailer connector and then adapt this to a 7-way so you can hook up a brake controller. I won't have much info for anyone particular dump truck but…

view full answer...

Answer 7

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Replacement Cam Lock Cylinders For Global Link Door Handle Locks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching