What Tire Brand Is On Your Trailer Wheel and Tire Combination

Question

Question:

What brand of tire is mounted on the rim? Specifics please.

asked by: Shawn

0

Expert Reply:

I checked our warehouse and called our supplier and the brand of tire we have in stock for the Kenda ST175/80R13 Radial Trailer Tire with 13 Inch White Wheel, part # AM31951, at this moment is Loadstar Karrier.

Our supplier changes tire manufacturer from time to time so the current stock is all I can speak for and the tire brand could change at any time.

expert reply by: Robert G

0

Answer 1

According to Dexstar, the Steel Spoke Trailer Wheel, #AM20524, has a capacity of 2,050 pounds at 75 psi. This is a 15 inch by 6 inch galvanized trailer wheel with a 5 on 4-1/2 bolt pattern. I have included a link to an FAQ article that explains how…

view full answer...

Answer 2

You could potentially go to a larger tire/wheel combo as long as there is space all around the existing tires for the larger size. I would need to know the tire size you are using now to determine the next step up and the differences in sizes.…

view full answer...

Answer 3

In the galvanizing process, depending on how the manufacturer dries the wheels some of it can pool on one side due to the dipping processed used. That is an issue you are going to run into with many wheel manufacturers. It is an ongoing issue. What I…

view full answer...

Answer 4

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 9

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

What Tire Brand Is On Your Trailer Wheel and Tire Combination

Product Page this Question was Asked From

Continue Researching