Boat Master Axle Hub Replacement for Saltwater Use 3,500 lb Axle
Question:
Hello I am a returning customer, and had a total bearing failure and would like to replace the entire axle hub assembly, to be safe. Ideally, I would like a fully -assembled hub with bearings pre-loaded. This is a boat trailer for salt water. I would also like stainless bearing buddies. Please see photos and let me know. thank you very much
asked by: Tristan S
Expert Reply:
It's not pre-greased but we have a stainless steel hub part # KH84545S that fits your spindle and would work great in salt water. You would need to supply the bearings with part # L68149 and # L44649 as well as with the seal # 58846.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Q&A: Replacement Bearings and Seal for 2015 EZ-Loader Skeeter Boat
- Search Results: trailer hub cover
- Search Results: vault
- Search Results: fulton winch repair kit
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Recommended Hub/Drum Assembly for Salt Water Boat Trailer with 3500-lb Axle
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Search Results: 68149
- Shop: Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Fifth Wheel Hitch
- Search Results: dust cap
- Q&A: Recommended Dexter Suspension Kit 7753400
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)