bing tracking image
Q & A Icon

Trouble Getting Connectors Of Curt C56332 To Clip In Factory Connectors On 2019 Kia Sorento  

Question:

Is there a difference between the Curt 56332 and the harness you identify is Curt C56332! The two wire connector mates properly, but the 4 wire wont engage completely! What do you think my problem is? My car is a 2019 Sorento, EX V6, AWD, and it appears to have the two connectors you reference. The Curt 56332 looks like your version, as shown, but was purchased elsewhere before I found yours with the C preceding the 56332!! Got any idea why the 4 pin might not mate? Thanks for any guidance!

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness 56332 and our Curt # C56332 are the exact same harness.

You will need to wiggle the connector slightly while plugging the connector in to get it to seat correctly and match up with the pins on the vehicle end connector.

Make sure you have the locking ends of the connector matching the built in tab on the connector.

Lastly make sure you do not have any bent pins in either connector, and that there is no debris causing the connector to not fully seat.

I included a video of the # C56332 being installed on a 2019 Kia Sorento for you to take a look at.

expert reply by:
0
Samuel C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>