Will the EZ Lube Zerk Contact the Grease Cap Plug for EZ Lube Grease Caps
Question:
I have a Nitro boat and trailer, I want to replace grease caps on the hubs but the problem is the grease zerks are of center of axle and would probably rub a whole in cap if doesnt have room for it turning.
asked by: Pete M
Expert Reply:
The # RG04-010 are designed for use on EZ Lube spindles and hubs, which it sounds like what you're referring to with the grease zerk at the center of the hub. It might be a close fit with the cap, but as long as everything is seated properly on the hub then it shouldn't be a concern. If you can let me know what your hub bore size is I can help you locate the appropriate grease cap.
I've also linked our entire selection for you to check out if you'd like, as well.
Product Page this Question was Asked From
Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Accessories and Parts
- Trailer Bearings Races Seals Caps
- Plugs
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: TruRyde Rubber Lube Plug Review
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Video: Review of TruRyde Trailer Bearings Races Seals Caps - Rubber Lube Plug - DC-RP
- Video: TruRyde E-Z Lube Grease Caps Plug Review
- Shop: Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1
- Shop: Replacement Lube Plug for DeeMaxx Grease Caps - Qty 1
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 2.45" Outer Diameter
- Q&A: Zerk Fittings Keep Falling Out on Boat Trailer With EZ-Lube Spindles
- Q&A: Will Grease Cap Plug Part RG04-010 Fit Tie Down Engineering SuperLube Grease Caps
- Q&A: Replacement Grease Cap Rubber Insert For EZ Lube Grease Caps
- Q&A: Should Center Plug of Grease Cap Plug E-Z Lube Grease Caps # RG04-010 be Pushed Out All the Time
- Q&A: What Size Hole Does the Grease Cap Plug RG04-010 Fit
- Article: Most Popular Wheel Bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: 44649
- Shop: Trailer Hitch
- Q&A: Replacement Leaf Spring for Trailer with Dexter 4,400 lb Axle
- Video: Review of Dexter Axle Trailer Brakes - Uni Servo Hydraulic Left, Right Brake Assembly - T2351300-200
- Shop: Trailer Wiring
- Shop: Grease Seals 10-36 (pair)
- Q&A: Replacement Leaf Spring Replacing Dexter 072-078-00 For 4,400 lb Axle
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Search Results: 68149
- Video: Lippert Solera Slider Slide-Topper Review
- Search Results: coupler