Trailer Coupler Lock

Question

Question:

I have a 2018 jayco jay flight 287bhs the tongue is 5”wide and 2 5/16 ball. What coupler hitch lock do I need

asked by: Robert S

0

Expert Reply:

I like the etrailer Trailer Coupler Lock, # e98895. This is lower price point but still very good quality lock for flat lip 2-5/16" ball couplers. This is made of aluminum construction with a shuttered keyhole that keeps out dirt and debris to prevent damage to cylinder. It has an easy quarter-turn lock activation.

expert reply by: Michael R

0

Answer 1

We have a few options for your coupler with a 4-1/2" lip. The etrailer Trailer Coupler Lock #e98895 is a good lock. From there we move up to the better Trimax Dual Purpose Coupler Lock #TMX67FR which uses a hardened steel construction. The…

view full answer...

Answer 2

When it comes to a hitch and coupler lock Set for a Demco hitch on your 2022 Airstream 25 foot Globetrotter The etrailer Hitch and Coupler Lock Set - 2 inch Hitch - 2-5/16 inch Ball #e68ZR will work unless you have a double-walled hitch or a factory…

view full answer...

Answer 3

Yes, the etrailer Trailer Coupler Lock for Flat Lip 2-5/16" Ball Coupler #e98895 will work on your coupler lip that is 3-3/4 inches wide.

view full answer...

Answer 4

I have a solution for you but the etrailer Hitch and Coupler Lock Set - 2" Hitch - 2-5/16" Ball item #e68ZR slides onto a standard coupler and most likely won't work on yours if it has a wider coupler and a larger rolled lip than in the…

view full answer...

Answer 5

For your 2019 Airstream International 23 having a rolled lip on the coupler you will want to use the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set #3794DAT. The etrailer Hitch and Coupler Lock Set #e68ZR you found is designed to fit on…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 12

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Trailer Coupler Lock

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching