Do They Make a 1-1/4" Adjustable Ball Mount?

Question

Question:

Is there an adjustable mount for 1 1/4 shank?

asked by: Ed O

0

Expert Reply:

The Lock N Roll 3-Position Adjustable Channel Bracket for 1-1/4" Hitch Receivers # 336VS507 will allow you to use a Replacement 2" and 2-5/16" Dual-Sided Hitch Ball # C45912. This will give you an adjustable mount that will have 3 different mounting positions in either the drop or rise positions.

The InfiniteRule Hitch Lock # 34061074-D will allow you to lock the hitch ball to the channel.

expert reply by: Bud M

0

Answer 1

The Lock N Roll 3-Position Adjustable Channel Bracket for 1-1/4" Hitch Receivers - 2,500 lbs #336VS507 will use the Lock N Roll Articulating Hitch - Adjustable Channel Mount - Vehicle Side - 11,000 lbs #336VS503 for your connection to your…

view full answer...

Answer 2

Yes, the channel of the Curt Channel Style Adjustable Ballmount #C45901 that you referenced is compatible with the Replacement 2" and 2-5/16" Dual-Sided Hitch Ball #C45912.

view full answer...

Answer 3

The 3 inch channel with 1 inch holes is fairly standard. The Curt Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs #C45900 fits those descriptions. The Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Do They Make a 1-1/4" Adjustable Ball Mount?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching