FanMate Fan Cover for MA00-04500K MaxxFan Powered RV Roof Vent

Question

Question:

Im interested in the MA00-04500K vent fan and wondered about the fan mate vent cover he mentioned in the video. Do you carry that?

asked by: Paul D

0

Expert Reply:

We certainly do, it's available in black as part # MA00-955002 or smoke as part # MA00-955003. Both are compatible with the # MA00-04500K MaxxFan Plus RV roof vent you'd looked at. You might also be intereste in the # MA00-955202 bug screen to keep the creepy crawly critters out.

I've linked to some installation videos that you might find helpful.

expert reply by: Mike L

0

Answer 1

The optional bug screen is #MA00-955202 for the MaxxAir FanMate Rain Cover #MA00-955002. I have linked a video review for you.

view full answer...

Answer 2

For your Maxxair Maxxfan you'd want the part #MA00-955002 for a roof vent cover.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Yes, for the white version of the MaxxFan Deluxe Roof Vent with 12 volt fan, thermostat, remote and powered lift we have the part #MA00-07000K which is exactly what you need.

view full answer...

Answer 7

Hey Devon, does your RV roof vent wall control unit look like the #MA59FR? If so you have a MaxxFan Plus RV roof vent that was designed for wall control and for a replacement unit you would want the part #MA00-04500K to use a setup that would use…

view full answer...

Answer 8

Yes, you are correct. All you need to wire in the MaxxFan Plus Roof Vent #MA00-04500K that you referenced is a power and ground rated for at least 5 amps and a 14 inch by 14 inch square hole cut in your roof.

view full answer...

Answer 9

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 10

It sounds like you need to just re-examine the wiring to and from your 6300A converter. I believe you're saying that when you connect to a power pedestal only some of your functions work and your battery bank is drained, and that shouldn't be…

view full answer...

Answer 11

Thanks for the pictures! The Replacement Converter for your Magnetek Converter Series 6300 Model 6332 is going to be the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 35 Amp item #PD4635V.

view full answer...

Answer 12

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

FanMate Fan Cover for MA00-04500K MaxxFan Powered RV Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching