Will the Kuat Transfer 1 Bike Add On Fit on a T201B Transfer V2

Question

Question:

hi i have a kuat transfer V2 1 bike rack KU64FR can i use this 1 add on rack?

asked by: Mac

0

Expert Reply:

Yes. The # KU57FR is compatible with the T201B Kuat Transfer V2 1 Bike Platform Rack # KU64FR.

expert reply by: Erik B

0

Answer 1

Yes Eric, the Thule Access Swing Away Bike Carrier 9037 will work great with your Thule T2 Pro XTR Bike Rack for 2 Bikes #TH83JV.

view full answer...

Answer 2

The 1 Bike Add-On #KU57FR allows you to add an additional bike to the Kuat Transfer V2 Bike Racks 1-Bike #KU64FR, 2-Bike #KU84FR or 3-Bike #KU24FR racks. The 1-Bike Add-On TSAOB is for the previous V1 version of the Kuat Transfer. The mounting…

view full answer...

Answer 3

If you go with the Kuat NV #NV22G then you can add a 2-bike extension later using #NA22G. Or just get them both together using #NV22G-NA22G. Either way will work. The bike stand can go at the end of the NV22G (2-bike mode) or at the end of the NA22G…

view full answer...

Answer 4

Yes, the Kuat NV 2.0 series platform bike rack #NV22G-NA22G that you referenced is an add-on type of rack that can be used as either the 2 bike base rack or the 4 bike rack with the extension. The base two bike Kuat NV 2.0 rack is #NV22G. These racks…

view full answer...

Answer 5

The Kuat Single Transfer part #KU64FR would slightly obstruct the view of the backup camera of your 2018 Chevy Volt but for the most part you'd be looking over the top of your bike if it was loaded and through the frame and you'd still be…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Will the Kuat Transfer 1 Bike Add On Fit on a T201B Transfer V2

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching