Availability of B and W Companion Hitch with 25k Capacity for 2021 Chevy Silverado 3500

Question

Question:

Does BandW make a hitch base for the 2021 Chevy 3500 OEM puck system 30k or 25k

asked by: Phillip

0

Expert Reply:

B and W does make a Companion hitch that fits the OEM rail kit of your 2021 Chevy Silverado 3500 with the part # BWRVK3715 which has a 25k capacity.

For just the base of this we have the part # BWRVB3715 as well.

expert reply by: Jameson C

0

Answer 1

Yes, you can take the head that's on your current Companion hitch and swap it onto the base part #BWRVB3715 and you'll have a complete Companion hitch that fits your 2020 GMC Sierra 3500 OEM rail kit.

view full answer...

Answer 2

The B and W Companion Hitch Base part #BWRVB3710 which is the lower portion of the hitch #BWRVK3710 does fit the OEM rail kit of the 2022 Chevy Silverado 2500HD. We confirmed this with B and W.

view full answer...

Answer 3

No, the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Chevy/GMC #BWRVB3705 is not going to work with your 2024 GMC Sierra 2500. You're going to want the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch…

view full answer...

Answer 4

The jaws of the B and W Replacement Head part #BWRVC3006 are not adjustable and they do not require tightening. It's a little annoying but most hitches have a little bit of movement which makes that clicking sound you mentioned.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...