Battery Box Dimensions of TorkLift HiddenPower Under-Vehicle Battery Mount for Group 24

Question

Question:

Just wondering what the battery box exterior dimensions are? I know it says it fits group 24 and 31 batteries.

asked by: Paul I

0

Expert Reply:

The external dimensions of the battery box that comes with the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box part # TLA7726 are 14" long x 10-11/16" tall x 10" wide.

expert reply by: Conner L

0

Answer 1

The TorkLift HiddenPower Under-Vehicle Battery Mount #TLA7726 does indeed mount in a specific location. To put it anywhere else would require drilling into the frame on your 2016 Ford F-150. The instructions are as follows: Step 1: Locate the area of…

view full answer...

Answer 2

Per manufacturer the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box, #TLA7726 is approximately 8.5" center-to-center across and 3.5" center-to-center vertically. The battery box does have vents and allow cables to pass…

view full answer...

Answer 3

I recommend taking a look at the Taskmaster ST205/75R14 Radial Trailer Tire #TR20514. This is a great radial tire with a maximum load of 1,760 pounds at 50 psi. It has an excellent maximum speed of 81 mph and a 6 ply rating and also includes a 2-year…

view full answer...

Answer 4

The TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7730 or the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7726 are ideal for the mount style and location you need. If you want a metal box, then I…

view full answer...

Answer 5

So it sounds like you are needing an RV cargo slide out tray that extends at least 50 inches in order to go past your slide and the depth of your refrigerator. There may be an option for you, so long as your cargo compartment is at least 72 inches…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 11

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Battery Box Dimensions of TorkLift HiddenPower Under-Vehicle Battery Mount for Group 24

Product Page this Question was Asked From

Continue Researching