Ball Mount With 1 Inch Rise That Extends More Than 6-1/2 Inches & Fits 2 Inch Trailer Hitch
Question:
With a distance of 6-1/2 inches from the center of the hitch pin hole out to the furthest point out on the rear bumper, and needing a 1” rise, what length ball mount do I need for towing a small trailer?
asked by: Chris
Expert Reply:
We can get you set up with a longer ball mount that has 1 inch of rise and will fit your 2 inch trailer hitch receiver. There is a really good option from Curt that is extended and will work perfectly for you:
- Curt Solid Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 10" Long # C45312
This ball mount measures 10 inches from the center of the hitch pin hole to the center of the ball hole so it will give you the clearance you need. Then to secure the ball mount to your hitch, you will need the Curt Pin and Clip # C21510 or Trailer Hitch Receiver Lock # e98882.
Finally, you'll need the correct hitch ball, which for a 2" coupler is the 2" Hitch Ball # A-90.
Products Referenced in This Question
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Curt Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
Curt Solid Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 10" Long - 12K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Stainless Steel
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 1 14 hitch covers
- Search Results: sway bar
- Search Results: sway bar ball cover
- Article: Trailer Wiring Diagrams
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Q&A: Replacement for AL-KO 1530116 and 1530117 Brakes
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Q&A: Trailer Hitch For A 2016 Subaru Forester PZEV
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Does the Heat Shield of a 2015 Subaru Forester Need to Get Removed to Install Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited