Will etrailer Trailer Hitch Receiver Fit A 2020 Ford Escape?

Question

Question:

want to make sure DT95MR fits my 2020 Ford Escape Your web site states it will fit, I'm just double checking! thx

asked by: Cole C

0

Expert Reply:

The etrailer Trailer Hitch Receiver # e89YR definitely does fit your 2020 Ford Escape.

This is a perfect choice for carrying a bike rack, cargo carrier, or towing a trailer.

expert reply by: Samuel C

0

Answer 1

While the Draw-Tite Max-Frame Trailer Hitch Receiver #DT95MR will fit on a 2022 Ford Escape Hybrid it will not work on your PHEV. The PHEV is different from the standard hybrid and currently there is not a aftermarket receiver capable of fitting your…

view full answer...

Answer 2

When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot…

view full answer...

Answer 3

The biggest difference between the trailer hitch options for a 2022 Lincoln Corsair is installations, the etrailer part #e89YR and Curt part #C23FR will be much easier to install than the Draw-Tite part #DT95MR. The Draw-Tite requires the exhaust to…

view full answer...

Answer 4

The main difference between the Curt #C23FR and etrailer #e89YR for your 2022 Ford Escape is the finishes. The Curt #C23FR has a glossy black finish and the etrailer #e89YR has a matte black finish. Their capacities and installations are the same. It…

view full answer...

Answer 5

The best trailer hitch for your 2020 Ford Escape, and the hitch I would install on mine is from etrailer: - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e89YR The reason I really like this hitch over any…

view full answer...

Answer 6

The Class III hitch like the etrailer #e67AR or the Curt #C23FR are the only hitch fits available for the 2020 Ford Escape Hybrid, which isn't a bad thing because the Class III hitch is the most common receiver size that would have the best…

view full answer...

Answer 7

We do have a trailer hitch confirmed to fit all models of the 2020 Ford Escape, including the Hybrid - the etrailer Class III Hitch Receiver #e89YR. This has a 2 inch receiver and a tongue weight capacity of 525 lbs, perfectly suitable for a bike…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Will etrailer Trailer Hitch Receiver Fit A 2020 Ford Escape?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching