Will the Rhino-Rack Accessory Bars Fit on an 84" x 56" Pioneer Platform

Question

Question:

Will this fit onto 84x56 pioneer platform?

asked by: Ethan O

0

Expert Reply:

Yes. The Rhino Rack Accessory Bars for Pioneer Platform Rack # RR43138B will fit on the 84" x 56" Pioneer Platform # RR75TB.

expert reply by: Erik B

0

Answer 1

I reached out to my contact at Rhino-Rack and because of the way that the traditional roof boxes mount like the Yakima SkyBox NX 16 Rooftop Cargo Box #Y95AV the hardware won't be able to fit to the crossbars on the underside of the platform.…

view full answer...

Answer 2

With the Rhino Rack Pioneer Platform part #RR33QX that you referenced the recommended accessory bar is the part #RR43138B which is 53 inches long.

view full answer...

Answer 3

Rhino Rack offers a crossbar adapters for the top of their Pioneer Platform trays with the part #RR43138B for a 53 inch bar, part #RR43119B for a 48 inch long bar, and #RR43232B for a 24 inch long bar which attaches to the top of the platform and…

view full answer...

Answer 4

The Rhino-Rack MasterFit Rooftop Cargo Box RRRMFT440 can be installed on the Rhino-Rack Pioneer Platform Rack you have on your 2021 Toyota RAV4 but you need the Accessory Bars #RR43137B as well since the cargo box can't mount directly to or with…

view full answer...

Answer 5

The Yakima Skybox NX 16 #Y95AV is exactly what I recommend for you. This is due to it having a large storage size of 16 cubic feet and the fact that the SkyBox will mount forward on your vehicle giving you an additional 4-1/4" of rear hatch…

view full answer...

Answer 6

The Rhino-Rack MasterFit Rooftop Cargo Box part #RRRMFT440 fits any crossbars measuring up to 3-9/16" wide x 1-3/8" tall with a spread between 24-3/8" - 36-5/8" (center to center). In regards to roof clearance, I can't imagine…

view full answer...

Answer 7

I have some great options for you as far as pioneer platforms on your LeerXR camper shell. In order to mount the 60x56 Pioneer Platform #RR72TB with factory Thule tracks, you will need the Rhino-Rack Universal Modular Backbone Mounting System - Short…

view full answer...

Answer 8

I do have a solution for you but J-Style carriers are meant to be used for carrying kayaks because paddle boards are supposed to be transported laying down flat. The only way to have 2 J-Style kayak carriers and be able to transport your 2 paddle…

view full answer...

Answer 9

The Rhino Rack Backbone base needs to have a Pioneer Platform attach to it like what comes with the part #RR93ZW but you do have the option to add bars to the platform like with the #RR43138B if you were wanting the ability to have basically the best…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Will the Rhino-Rack Accessory Bars Fit on an 84" x 56" Pioneer Platform

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching