Which Timbren Kit Fits 2019 Ram 2500 4x4 Towing Fifth Wheel Trailer

Question

Question:

I have a 2019 Ram 2500 Diesel 4X4, 6foot 4inch bed. Im towing a 5th wheel. Looking to get the right part for the rear axel. What is your suggestion?

asked by: Scott M

1

Helpful Expert Reply:

The Timbren suspension enhancement kit part # TDR2500D that you referenced is a correct fit for your 2019 Ram 2500 diesel 4x4 and is compatible with in-bed hitches like your fifth wheel so it would fit and work great for your application.

expert reply by: Jameson C

1

Answer 1

Congratulations on your new truck bed camper! I'm sure you will enjoy it for many years. Sway is a common issue with truck bed campers which can be reduced, but not eliminated. The campers are not particularly aerodynamic and the sway will…

view full answer...

Answer 2

Since you mentioned your 2021 Ram 2500 Big Horn Short bed having a payload capacity of 3383 I recommend going with the SumoSprings Rebel Custom Helper Springs - 2 Piece - Rear Axle #SS27GR as they have a load leveling capacity of 5000lbs to support…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

It is typical to have approximately 1/2 inch of space between the bottom of the bumper and the axle. Removing the spacer will help to improve the ride quality. With the spacer gone, the distance increases to 1-1/2 inches, and will improve ride…

view full answer...

Answer 5

I spoke with my contact at Timbren, and he confirmed that it is normal for the rubber spring to not sit directly in the center of the axle stopper. The reason for this is the spring location is compensating for axle movement, since the axle…

view full answer...

Answer 6

I tried looking up the part TD2500D that you referenced but I couldn't find anything. The Timbren Rear Suspension Enhancement System #TDR2500D that fits your 2015 Ram 2500 is rated for 8,600 lbs as listed on our site. I verified this with…

view full answer...

Answer 7

The Timbren Rear Suspension Enhancement System #TDR2500D are designed to fit the following vehicles: 2014 - 2022 Ram 2500 2 Wheel Drive 2014 - 2022 Ram 2500 4 Wheel Drive 2014 - 2014 Dodge Ram Pickup 2500 So this will fit your 2016 Ram 2500 just…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Which Timbren Kit Fits 2019 Ram 2500 4x4 Towing Fifth Wheel Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching