How Do You Install Curt Powered 3 to 2 Wire Converter 59146 In 2015 Lexus RX 350 W/O Tow Package
Question:
HOW TO FIND BACKUP WIRE. 2015 LEXUS RX 350 WITHOUT TOW PACKAGE... I GOT THE CURT 59146
asked by: Thomas R
Expert Reply:
We do not carry the Curt Powered 3 to 2 Wire Converter 59146 you have, but I would be happy to go over how it installs.
You will need to connect the Red wire to the brake light wiring on your 2015 Lexus RX 350, the green wire to the passenger side turn signal wire, the yellow wire to the driver side turn signal wire, the brown wire to the tail light wire, and black wire to the positive terminal of your battery with the included fuse.
You will not need to hook any of the wires up to the reverse light wire you mentioned, but using a circuit tester like # PTW2993 will identify the functions of the wiring to make sure it gets installed correctly.
I included a link to a helpful article on wiring for you to take a look at.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: Troubleshooting Brake Controller Installations
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working