Can You Install A Ladder Rack With A Tonneau Cover?

Question

Question:

Which Tonneau Cover and ladder rack combination can I use on my 2018 Toyota Tundra?

asked by: Tom

0

Expert Reply:

This ladder rack utilizes the inside rails of the bed so it won't be the best candidate. If you have the RetraxONE # RTT-60832 you can use the Yakima Outpost # Y01151-5855 together! It looks amazing and is adjustable as well! These will all fit your 2018 Toyota Tundra.

expert reply by: Adam E

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the…

view full answer...

Answer 3

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

view full answer...

Answer 4

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 5

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 6

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 7

Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a…

view full answer...

Answer 8

Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake controller…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

From your question it sounds to me like someone has cut off the tow package plug on your 2005 Ford F-150 and wired in a 4-way connector. In this case you could use the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole, #37185 which will give you a 4-way…

view full answer...

Answer 11

Yes, to both of your questions! The Mountain Top EVO-M Retractable Hard Tonneau Cover with T-Slot Accessory Rails - Aluminum item #MNT29FR is confirmed to fit the 2021 Chevy Silverado 1500's with a 6-1/2' bed. It is also compatible with the…

view full answer...

Answer 12

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Can You Install A Ladder Rack With A Tonneau Cover?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching