Recommended Trailer Hitch for a 2021 Jeep Cherokee

Question

Question:

Need help ing a hitch for a 2021 Jeep Cherokee

asked by: Lori C

0

Expert Reply:

The Curt Trailer Hitch Receiver part # C13395 is what I recommend for a 2021 Jeep Cherokee. It is a custom bolt-on option with no drilling required. It has a hidden design which means the cross tube is hidden and the only part shown is the receiver tube. This makes for the best overall fit and finish. The hitch has a class III rating with 2" receiver tube opening.

expert reply by: Conner L

0

Answer 1

I checked the installation instructions for the Curt Trailer Hitch Receiver part #C13395 and they stated there may be trimming of the exhaust bezel on certain models. I checked out our reviews and found others with the Latitude Lux trim, there was no…

view full answer...

Answer 2

For your 2019 Jeep Cherokee I recommend the Curt Trailer Hitch Receiver #C13395 because of its hidden crosstube design, higher weight capacities, and the fact that it is made right here in the USA. It will provide you with a 2 inch receiver and will…

view full answer...

Answer 3

For your 2021 Jeep Cherokee Latitude edition, I definitely recommend the Curt Trailer Hitch Receiver - 2" #C13395. Not only will the Curt hitch fit your Latitude model, but it also provides you with 675 pounds of maximum tongue weight capacity…

view full answer...

Answer 4

The Curt #C13395 and etrailer #e73ZR are in fact nearly identical. However, what sets the etrailer hitch apart is the matte black powder coat finish. This gives it more of an OEM appearance for a sharp look on your 2022 Jeep Cherokee and is also the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Recommended Trailer Hitch for a 2021 Jeep Cherokee

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching