Replacement Bearings and Seals for Dexter 4.4k Trailer Axle

Question

Question:

need bearings for dexter 4.4k axle with six lug hubs and electric brakes

asked by: Jeff B

1

Helpful Expert Reply:

For the Dexter 4.4k axle we have the following bearing/seal parts available:

Inner Bearing # L68149
Outer Bearing # LM67048
Seal # RG06-050
Inner Race # L68111
Outer Race # LM67010

expert reply by: Jameson C

1

Answer 1

Thank you for the photos, though there is only one measurement there so it would be very difficult for me to tell you exactly what you currently have. That said, the most important measurement you can take is of your brake mounting flange, and I…

view full answer...

Answer 2

I can see why this is confusing. The outer diameter of the race, which is the only difference between the #L68111 and #L68110, is only important to the hub itself and they will both correspond to the #L68149 bearing that you mentioned. The race…

view full answer...

Answer 3

It sounds like you probably have a very common #84 spindle which uses #L68149 for the inner bearing which has an inner diameter of 1.378 inches, #L44649 for the outer bearing which has an inner diameter of 1.063 inches, as well as a 10-19 seal that…

view full answer...

Answer 4

We can help you find the correct bearings on your trailer, which is pretty easy and only takes a bit of measuring. So in order to find the correct bearings you will need to take apart your hub assembly and look at the bearings themselves; wipe away…

view full answer...

Answer 5

First, it does sound like, based on the measurement and information you have provided, that race #L68110, is correct since its outer diameter is 2.327 inches. This race is associated with bearing #L68149 which has an inner diameter of 1.378 inches…

view full answer...

Answer 6

The #L68110 Race in my application charts works with the #L68149 bearing. We do show that the #L68149 bearing also works with the #L68111 race and this may be the application you need. The #L68149 inner bearing is paired with the #L44649 outer…

view full answer...

Answer 7

We do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: Bearings #L68149 and…

view full answer...

Answer 8

We don't know exactly what bearings you would need for your trailer but I can tell you how to determine that information. You will want to take your hub off of your trailer and remove both the bearings, there will be a number stamped on them that…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Replacement Bearings and Seals for Dexter 4.4k Trailer Axle

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching