Roof Rack & Attachments For 2010 Toyota Tacoma TRD SR5

Question

Question:

Hello, I have a 2010 Toyota Tacoma TRD SR5, access cab, 4x4 with a tonneau cover. I do not have a topper/camper shell/cap. I am looking for a rack for kayaks, canoes, travel boxes, etc. What are my options? Thanks!

asked by: David H

0

Expert Reply:

I would get the Yakima HD Bar Roof Rack System. You'll need the HD bars # Y01156 Skyline Towers # Y53TR HD bar adapter # Y03541 and landing pad # Y74FR. You can then use the JayLow Kayak Carrier # Y04073, Off-Grid Cargo Basket # Y07139 or Skybox Cargo Box # Y95AV. These are just my suggestions for accessories but there is much much more on our website if you're wanting something different!

expert reply by: Adam E

0

Answer 1

I have a great cargo box solution for you. Without knowing the exact model or dimensions of your HD bars on your trailer, the Yakima SkyBox 21 #Y07337 will fit if the crossbars do not exceed 3-1/2 inches wide x 1-11/16 inches tall. In order to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 8

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Roof Rack & Attachments For 2010 Toyota Tacoma TRD SR5

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching