Hydraulic Disc Brake and Electric Over Hydraulic Actuator for 2017 Grand Design Reflection 28BH
Question:
Hello, I am planning a disk brake conversion for my 2017 Grand Design Reflection 28BH Fifth Wheel. I have 5200lbs Lippert Axles #120064. My tow vehicle is a 2016 Chevrolet Silverado 3500HD with integrated brake controller. I have identified the following parts: - Kodiak Disc Brake Kit - 12 Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs - K2HR526D - Qty 2 - Bearing Kit, 15123/25580 Bearings, 10-36 Seal - BK3-100 - Qty 4 - HydraStar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi - HBA16-252-82 - Qty 1 - HydraStar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers - HBA-CAM - Qty 1 Can you confirm I have identified all the correct parts I will need? Thank you. Jack
asked by: Jack
Expert Reply:
It looks like you're on the right track. Assuming that your existing hubs use the 15123 outer/25580 inner bearings and the 10-36 seal, the Kodiak # K2HR526D disc brake kit and the # BK3-100 bearing kit will work great. Keep in mind that the # K2HR526D already includes the races which are preinstalled, but there's nothing wrong with having a few extra parts on hand. It's typically less expensive to get the bearing kit than purchasing the parts individually anyway.
The # HBA16-252-82 Actuator kit with brake lines would be compatible with the OE brake controller on your truck with the addition of the # HBA-CAM adapter. The HydraStar is one of our install team's favorites, because of how well it works.
I've linked to some install videos that you might find helpful.
Products Referenced in This Question
Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 15123 and 25580
- Race 25520 and 15245
- 6000 lbs Axle
- etrailer
more information >
Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Adapters
- Hydrastar
more information >
Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels
- Article: How to Charge a Dump Trailer Battery
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Q&A: Replacement Trailer Suspension For Single Axle Boat Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Replacing Parallex 7345 Converter to One that is Compatible with Lithium Batteries
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Q&A: Recommended Replacement For A WFCO WF-8750P Power Center
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: What is Boondocking
- Article: Trailer Tester Battery Replacement for Part Number 8010