Replacement Hub / Disc Brake Kit For EZE-TOW Tow Dolly With 5 On 4-1/2
Question:
I have an ez tow tow dolly with 205/65/10 tires. Im looking for hub and rotors, calipers and disc brakes. The hub and rotors I have now are 5 on 4 1/2. GVWR 5000 LB GAWR 3000 LB It says on the dolly that its a Disc Brake Trailer Buddy by UFP if this helps. Do you have anything that will work and fit this dolly. Thank you
asked by: Gregory B
Expert Reply:
I did some research and found that the Kodiak Disc Brakes - 2 Wheel Set - 8" Rotor and Hub Spacer 3,500 lbs # K2HR35D-8 will be your best bet. This is compatible with your 5 on 4-1/2" pattern and your 10" wheels. The bearings and seals are not included. For the seal go with Grease Seal # RG06-050, for the inner bearing go with # L68149, for the outer bearing you will need # L44649.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: tow dolly parts
- Shop: Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs
- Search Results: hydraulic brake hitch
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: CIPA Clamp-On HotSpot Mirror - 4" x 8" - Convex
- Q&A: Clamp On Blind Spot Mirror For Ford E450 Econoline Coachmen Motorhome
- Shop: Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000 lbs
- Video: Kodiak Trailer Brakes - Disc Brakes - K2HR35D-8 Review
- Video: CIPA Mirrors - Blind Spot Mirror - CM49504 Review
- Q&A: What is the Size of the Threaded Stud on the Back of CIPA Clamp-On HotSpot Mirror - 4" x 8" CM49504
- Video: Kodiak Disc Brake Kit Installation K2R35D
- Shop: Suspension Enhancement
- Q&A: Recommended Bearing Protectors To Replace Vault Pressurized Bearing Protectors
- Q&A: Removing and Replacing Trailer Spindles
- Q&A: Can a Trailer Axle be Converted to an EZ Lube Axle by Replacing Spindles
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Shop: Vehicle Sway Bars
- Q&A: Tire and Wheel Compatible with Acme EZE Tow Dolly
- Shop: RV Camera
- Shop: RV Jack Pads
- Q&A: Difference Between 205/65-10 and 20.5 x 8-10 Trailer Tire Sizes
- Article: Calculating Portable Generator Power Needs
- Search Results: 34039
- Search Results: surge brake actuator
- Search Results: dexter rotor
- Search Results: 145r12