Correct Westin HDX Grille Guard Hardware and Brackets for a 2016 Ford F-150

Question

Question:

I have a 2016 f150 and I need the mounting hardware for the westin hdx grill guard. Do you have this kit?

asked by: Darrin O

0

Expert Reply:

The correct Westin HDX Grille Guard for a 2016 Ford F-150 is part # 57-3835 and the correct Replacement Mounting Brackets and Hardware is part # 57-383PK.

expert reply by: Conner L

0

Answer 1

The replacement mounting hardware for the Westin HDX Grille Guard with Punch Plate #57-3835 that fits your 2020 Ford F-150 is part #57-383PK. Please note that grille guards and their hardware kits are vehicle specific fits.

view full answer...

Answer 2

For your Westin HXD Grille guard #57-3830, the replacement hardware you need for your vehicle is the Replacement Mounting Brackets and Hardware for Westin HDX Grille Guard with Punch Plate #57-383PK. However, it is important to note that these…

view full answer...

Answer 3

The replacement mounting brackets for the Westin HDX Grille part #57-3785 that you referenced is the part #57-378PK which would fit the stainless steel or black version of this guard.

view full answer...

Answer 4

The Westin HDX Grille Guard you have now part #57-3835 fits the 2015 through 2020 F-150's so it should fit as-is and not require any different mounting hardware. Going with the new hardware #57-378PK won't give you anything differently from…

view full answer...

Answer 5

I contacted Westin and though the picture does just show one of the brackets, the #57-383PK Replacement Mounting Brackets and Hardware Kit does include both options. So it will have the bracket for a 2015 to 2017 F-150 and the brackets for a 2018 to…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Correct Westin HDX Grille Guard Hardware and Brackets for a 2016 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching