Correct Roadmaster Replacement Arms for Base Plate Kits

Question

Question:

I need a replacement set of just the removable tow arms. They have a sticker on them with the number 521453-C. But I cannot find them on the site. Please let me know what to enter in the search bar. Thanks

asked by: Stephanie W

0

Expert Reply:

It sounds like you're actually looking for the base plate tabs and if that's the case we do offer replacements using the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS.

expert reply by: Conner L

0

Answer 1

To connect a Blue Ox base plate to a Blackhawk 2 All Terrain tow bar like item #RM-422 you will need the Roadmaster Tow Bar to Blue Ox Brackets Adapter item #RM-031.

view full answer...

Answer 2

We do offer a replacement yoke for the Blackhawk part #RM-422, for that you would want the part #RM-480001.

view full answer...

Answer 3

Per the manufacturer when installing the Roadmaster 9700 braking system the black and white wires are for the breakaway connection. The green wire will then take the brake signal wires from the lighting kit and will use it as an activation for the…

view full answer...

Answer 4

It sounds like you're using the Roadmaster Blackhawk 2 #RM-422 with a Blue Ox base plate kit. In which case the tow bar will use adapters, either #RM-031 or #BX88262, to connect. The picture I've attached shows the Blue Ox connector that…

view full answer...

Answer 5

Thank you for your photo Jim. It does look like the inner arms of your Falcon 5250 got bent somehow. I contacted Roadmaster and there are not replacement inner arms available for the Falcon 5250 anymore or a repair kit because it's an older bar.…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Correct Roadmaster Replacement Arms for Base Plate Kits

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching