Replacement for Dico 15638 Hub Drum and Brake Shoes for 10 Inch Atwood Hydraulic Brake Assembly
Question:
I NEED A WHOLE REPLACEMENT FOR A DICO #15638 AND A ATWOOD 10 FE LINING. THANKS
asked by: Xong H
Expert Reply:
The Dico 15638 is a 10 x 2-1/4 inch brake drum/hub that used kind of an oddball bearing setup, inner bearing LM67048 and 3/4 outer bearing LM11949. None of the hub/drums we currently carry are compatible with this bearing set. If the drums are still in good shape, you can retain them and use the # BP04-120 replacement brake shoes which are a replacement for the brake shoes on your Atwood hydraulic brake assembly.
If your hub/drum isn't usable, your best bet would likely be to replace your axle beam. We offer a few of the most common axles, in order to see if anything we offer would work, I'd need to know the hub face to hub face distance and the center to center distance between the spring seats as well as the axle's capacity.
With that information, I might be able to recommend an axle that's compatible with hubs that are available.
Product Page this Question was Asked From
10" X 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel)
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- RH
- Brake Shoes
- 10 x 2-1/4 Inch
- Redline
more information >
Continue Researching
- Search Results: 8~285~8
- Shop: Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hydraulic Drum Brakes for Dico 15638
- Shop: Trailer Wiring
- Shop: Solera Classic Universal Arms for Manual Pull-Style RV Awnings - 68" to 81" Long - White
- Shop: Trailer Hitch
- Shop: Fifth Wheel Hitch
- Search Results: trailer hitch
- Search Results: 8~285
- Shop: Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Easy Grease Trailer Hub and Drum Assembly for 8K Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Search Results: 8~285~11
- Search Results: wesbar trailer lights
- Search Results: 16029
- Search Results: hangers
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacing Bearing Seals on Older DICO Hub and Drum
- Q&A: Replacement Trailer Hub Grease Seal for TCM 17255TB Seal
- Q&A: Which Grease Seal is Associated with L68149 Bearing and L68110 Race on a Boat Trailer Hub
- Video: Trailer Hub Inspection Demonstration
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Video: Packing Trailer Bearing Demonstration
- Q&A: Do You Still Need to Pack Hub Bearings If Bearing Buddies are Used
- Q&A: When Using Bearing Buddy Bearing Protectors Do I Need To Repack Bearings Periodically?
- Video: Removing and Replacing Trailer Brake Shoes Review
- Video: etrailer Left and Right Hand Hydraulic Brake Kit Installation