Recommended Solution for 2008 GMC Sierra with 2" Hitch Needing Extended Ball Mount
Question:
I have a 08 GMC Sierra 2500 my hitch is rated for up to 7500 lb. Tow and 1000 tongue, need to extend it, i built a food trailer and my gen. And propane is on the tongue of trailer. Do u have any options? Thank you
asked by: Richard M
Expert Reply:
I have a solution for you, and the issue you'll encounter when you start using hitch extensions is that the further the weight gets away from the hitch, it reduces the tongue weight of the hitch by 50% or more. For that reason I don't recommend using any type of supplemental extension that the ball mount would then fit into.
I recommend simply using a ball mount that is a bit longer than normal like the Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs # BH20, which has a 2" drop and adds roughly 9" compared to a standard ball mount. If you need an adjustable ball mount then I recommend using the Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches # D900, which extends 15-1/4" from center of pin hole to center of ball. This ball mount also comes with 1-7/8", 2" and 2-5/16" hitch balls and can give you up to a 6" drop to keep your trailer level during towing.
I've linked some review videos of these parts for you to check out, but if you know what specific drop/rise you need to tow your trailer level and how much you need to extend the ball mount, just let me know and I can see if there is a ball mount that would work for that application.
Products Referenced in This Question
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- Three Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Long Shank
- Brophy
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Q&A: Difference Between Brophy # BM20 and # BH20 Ball Mounts
- Q&A: Is Spacing Around BullRing Tie-Downs in Stake Pocket Okay for a 2015 Ford F-350
- Q&A: Parts Needed to Install Trailer Brake Controller on 2016 Honda Pilot
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Troubleshooting Compressor Freezing Error On Air Lift WirelessAIR Compressor System
- Q&A: Best Trailer Hitch for a 2006 Dodge Ram 3500 with the 2" OEM Trailer Hitch
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: 16K Rated Ball Mount Made in the USA for 2 Inch Trailer Hitches
- Article: Trailer Hitch Receiver Sizes
- Article: Best Air Bag Suspension (2023)
- Article: The 5 Best Trailer Drop Hitches You Can Buy