Parts Needed to Flat Tow 2001 Jeep Wrangler with Factory Bumper
Question:
I have a 2001 Jeep 2 door Wrangler 4X4. I am looking for the entire kit to tow the Jeep behind an RV. I am interested in the removable eyelet/connector style. Also interested in the braking assist. Please provide a quote and parts list for the entire set up. Jeep is currently stock except for rims. Thank you-
asked by: Kenny L
Expert Reply:
For your 2001 Jeep Wrangler with a stock bumper the best base plate kit is the Roadmaster part # RM-521424-5 which is the easiest to use and has the removable arm design like you are wanting.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Falcon All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- Roadmaster
more information >
Roadmaster Accessory Kit for Falcon Tow Bars - Tail Light Wiring - Safety Cables - Lock Set
- Accessories and Parts
- Tow Bar
- Accessories Kit
- Falcon 2
- Falcon All Terrain
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Q&A: Where Does the RoadMaster Base Plate # RM-521424-5 Install Below Bumper on a 2004 Jeep TJ?
- Q&A: Coupler Lock Recommendation for a Bulldog A-Frame Coupler 44150WH301
- Q&A: Blue Ox Acclaim Tow Bar Compatibility With A Blue Ox Baseplate
- Q&A: Will The Buyers Products RV Side Camera Fit a 2014 Newmar Dutchstar 4369?
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Flat Towing Package for 1997 Jeep Wrangler
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Q&A: Best Parts to Flat Tow a Jeep Wrangler TJ with D-Ring Adapters
- Article: Base Plate Adapter Table
- Q&A: Recommended Flat Towing Components For A 2005 Jeep Wrangler With Double Tube Bumper
- Q&A: What Do I Need To Haul My 1999 Jeep TJ?
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)