Recommended Roof Racks for a 2017 Chevrolet Traverse

Question

Question:

I have flush rails, but I am confused about what I need to get then. So I would need the Crossbars themselves, RRVA137B-2 but your note said: "To attach these crossbars to your roof with flush rails, you will need the 2500 Series Legs, part # RRRLKVA, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs, part # DK297." Why would I need to get two sets of legs? Also, can you recommend some options for enclosed cargo boxes that would work with those rails?

asked by: Kevin G

0

Expert Reply:

I am not sure what you mean by channels. The 2017 Chevrolet Traverse has two options of roofs: one with flush rails and the other with a naked roof.

If you have the flush rails, I recommend the Rhino-Rack Vortex Aero Crossbars, part # RRVA137B-2. These are aero-style crossbars, so they are compatible with most accessories while cutting down on wind drag and noise. They're 54" long and have a weight capacity of 165 pounds. I've linked to a video review of these for you to look at.

To attach these crossbars to your roof with flush rails, you will need the 2500 Series Legs, part # RRRLKVA, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs, part # DK297.

If you have a naked roof, then your only option is to use the SeaSucker Monkey Bars Roof Rack, part # 298-SX6000B. These use vacuum cups to mount round bars to the naked roof. I've linked to a video review of these as well.

If you'd like to send those photos, I can assess whether or not the above options truly fit your roof or if something else will be needed.

expert reply by: Kef G

0

Kevin A.

3/16/2021

I have flush rails, but I am confused about what I need to get then. So I would need the Crossbars themselves, RRVA137B-2 but your note said: "To attach these crossbars to your roof with flush rails, you will need the 2500 Series Legs, part # RRRLKVA, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs, part # DK297." Why would I need to get two sets of legs? Also, can you recommend some options for enclosed cargo boxes that would work with those rails?

Reply

Kef G.

3/16/2021

When adding a roof rack, not only do you need crossbars, but you need the components to attach those bars to what you have on your roof. Since you have flush rails, the Rhino-Rack Vortex Aero Crossbars, part # RRVA137B-2, are what I recommended. To attach them, you need the legs, which are part # RRRLKVA. These are what attach to the crossbars. However, there is an additional component that most vehicles need, and that is the fit kit. Legs generally do not attach to flush rails without this fit kit (which is different for every vehicle). For this setup, that fit kit is part # DK297. As for your cargo box, I recommend the Thule Motion XT Rooftop Cargo Box, part # TH629706. It is 77" long x 36" wide x 17" tall and has 16 cubic feet of carrying capacity. It can hold up to 165 pounds (check your owner's manual to ensure your roof's capacity can handle the bars, box, and what's in the box), and it attaches to the Vortex bars by the PowerClick clamps. I've linked to a video review of this box along with the other videos below.

Reply

Answer 1

I have a solution for you, but unfortunately there are not any Thule roof racks available for a 2017 Chevy Traverse so you will need to go with a different setup. Since your roof is naked, meaning no factory rails, you will instead want to go with…

view full answer...

Answer 2

First you would want to start with a roof rack for your 2017 Chevy Traverse. For that the Rhino Rack part numbers #RRVA137B-2, #RRRLKVA, and #DK297 is a confirmed fit that would work well. Then for a kayak carrier you would want the Thule Hullaport…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 9

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 10

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 11

To add a roof rack to your 2022 Dodge Durango with no rails, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Black - Qty 2 item #Y39UV BaseClip Fit Kit for Yakima…

view full answer...

Answer 12

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...