Windshield Cover for 2021 Thor Omni Motorhome

Question

Question:

I’m looking for a windshield cover that will fit a 2021 Thor Omni. The cover should wrap around and cover the 2 side windows in the cab. Do you have a product available that fits these requirements. Thank you,

asked by: Alan

0

Expert Reply:

For your 2021 Thor Omni Super C the Class C Adco Deluxe Windshield Cover part # 290-2507 would be a fit and a really great option.

expert reply by: Jameson C

0

Answer 1

For your 2017 Thor Four Winds Motorhome, I recommend the Adco Deluxe Windshield Cover for Class C Motorhome - Vinyl - White #290-2507. This covers the windshield and the side windows of the cab which also provides privacy.

view full answer...

Answer 2

I reached out to my contact at ADCO to confirm this for your 2021 E350 cab. The ADCO #290-2507 will be a fit for you. I really like the ADCO brand for all kinds of covers.

view full answer...

Answer 3

I&#39;ve never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don&#39;t carry any parts to do that. The light generally needs to be hardwired into the truck&#39;s brake light…

view full answer...

Answer 4

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Windshield Cover for 2021 Thor Omni Motorhome

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching