Will Removing BedRug for 2021 GMC Sierra 3500 With 8 Foot Bed Weaken Velcro

Question

Question:

Will installing and removing the rug multiple times weaken the Velcro? How good is the Velcro at sticking to the truck bed? Is it possible to use a puck mounted fifth wheel hitch with rug installed?

asked by: Jeff

0

Expert Reply:

Installing and removing the BedRug Custom Truck Bed Mat # BR94FR repeatedly may result in less "stickiness" as it is really designed to be installed and then remain inside the truck bed of your 2021 GMC Sierra 3500, so I do recommend leaving it in after installation.

The fasteners are going to stick to the truck bed extremely well provided you follow the instructions when installing it in regards to making sure your bed is clean so it has a smooth surface to stick to. I have added a link below to the installation instructions for you of the BedRug Custom Truck Bed Mat # BR94FR.

You can use this with a puck-mounted 5th wheel but you would need to cut out holes large enough to ensure the entire 5th wheel hitch can still rest entirely on your truck bed and not at all on the mat. Additionally, there is also a tailgate portion if you want your Sierra's tailgate covered, the BedRug Custom Truck Tailgate Mat # BR64FR.

expert reply by: Kyle S

0

Answer 1

The #BR96ZR is the only compatible mat that BedRug currently has for the 2023 GMC Sierra 3500 with Multipro Tailgate. This liner is the entire bed along with the tailgate, which is more than you were asking for but is the only option that they…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 6

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Will Removing BedRug for 2021 GMC Sierra 3500 With 8 Foot Bed Weaken Velcro

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching