Can I Upgrade My Trailer Wheels From 8 Inch To 12 Inch?
Question:
Can i upgrade my wheels and tires on my trailer from 8inch to12inch?
asked by: Ronald V
Helpful Expert Reply:
There are a couple factors that play a part in if you are able to swap your tires from 8 inches to 12 inch. If you're running an 8 inch wheel odds are that you have a single axle trailer so that shouldn't be an issue. If you have fenders on your trailer you may need to remove them. If that isn't a problem then you have two bolt pattern options. 5 on 4-1/2 or 4 on 4.
Both bolt pattern options will have an overall diameter of 21.3 inches so you can use that to see how much height you will add to your trailer. For 5 on 4-1/2 get these # AM31202 and for 4 on 4 get these # AM31208HWTB.
Both look awesome and I've included a video of them both to get a closer look!
Product Page this Question was Asked From
Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 145/80-12
- 12 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Continue Researching
- Search Results: trailer chain
- Shop: Trailer Hitch
- Shop: RV Mattress
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Video: TowSmart Trailer Coupler Lock Kit Review
- Shop: Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs
- Search Results: max coupler
- Search Results: skid plate
- Search Results: raised receiver adapter
- Video: Buyers Products Adjustable Trailer Coupler - Coupler with Bracket - 3370091545 Review
- Video: CR Brophy Hitch Extender Review
- Video: Brophy Hitch Adapters - Hitch Extender - HES6 Review
- Video: MaxxTow Hitch Receiver Lock Review
- Video: Review of Demco Adjustable Trailer Coupler - DM13867-52
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs
- Shop: Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
- Shop: Curt RockerBall Shock Absorbing 2" Hitch Ball - 3/4" Diameter Shank - Chrome - 3.5K
- Q&A: Can The Lock N Roll Vehicle Side Hitch # 336VS503 Fit a Curt Adjustable Ball Mount # C45900?
- Search Results: trailer coupler locks
- Search Results: trailer lock keyed alike
- Search Results: trailer lock
- Q&A: How To Flip Square Trailer Axle For Ground Clearance
- Q&A: Parts Needed For Towing Trailer With 2" Receiver Style Coupler and Off-Road Hitch With 2" Hitch Ball
- Q&A: What All Do I Need To Use The Lock and Roll Hitch System?
- Q&A: How to Increase Height of Trailer Hitch Ball to Allow Boat Trailer to be Towed Level
- Shop: Curt Ball Mount for 2" Hitches - 8" Rise, 9-1/4" Drop - 14" Long - 5K
- Shop: Lock N Roll 3-Position Adjustable Channel Bracket for 2" Hitch Receivers - 11,000 lbs
- Q&A: Correct Draw Bar for Curt Class I Receiver C45025 on 2012 VW Golf TDI
- Q&A: Available Drawbars for 1-1/4 Inch Hitches with at Least a 5-inch Rise in the Shank
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub