Recommended Tow Dolly for a 2020 Chevy Equinox FWD

Question

Question:

What tow dolly should I get for a 2020 Equinox FWD?

asked by: Dale

0

Expert Reply:

The Demco Kar Kaddy SS Tow Dolly part # DM9713045 is the best option we offer for a 2020 Chevrolet Equinox FWD. It has surge brakes for increased stopping power, a steerable axle for better maneuverability, and a folding design for compact storage. The best part of all is that it will not require any modifications to the towed vehicle.

expert reply by: Conner L

0

Answer 1

The Kar Kaddy SS, part #DM9713045, does not have a lock out on the hydraulic brakes to keep them from engaging while in reverse. With that being said in most cases you won't need one because the dolly is only 615 pounds unloaded which…

view full answer...

Answer 2

When towing your 2020 Chevy Equinox on the Demco Kar Kaddy Tow Dolly SS part #DM9713045 you'd want the transmission in park and you'd want the key off to lock the steering wheel. If the wheel turned the fenders of the dolly would hit…

view full answer...

Answer 3

Yes, a 2019 Chevrolet Colorado 4x4 is flat-towable with all four wheels down. It looks like all models come with the 2-speed transfer case which is needed to be flat-towed so you should not have any issues. I have attached a list of parts for you…

view full answer...

Answer 4

For your 2022 Chevy Equino we have the Blue Ox Base Plate kit part #BX1730 as a confirmed fit. Which I really like the Blue Ox base plates and tow bars as I have found them to be very easy to use. In addition to the base plates, you will also need a…

view full answer...

Answer 5

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR, uses a 12V powered remote that wirelessly connects to the 12V powered braking unit. This wireless remote has an inertia-based sensor in it that can sense the braking of the towing…

view full answer...

Answer 6

Yes I pulled up the owners manual for your 2019 Ford Ranger 4x4 and it can be towed behind a motorhome with a tow dolly or with all four wheels on the ground with a tow bar. For a tow dolly we have the Demco Kar Kaddy SS part #DM9713045 which comes…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Recommended Tow Dolly for a 2020 Chevy Equinox FWD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching