Will Adding a Trailer Hitch to my 2020 Honda Fit Sport Void the Warranty
Question:
Hello there...... I am looking to put a trailer hitch on my 2020 Honda fit sport. The hitches that are available for my car on this site do not specify if they will fit on my sport model. I am pretty sure that our bumper is a bit different than the Regular version 2020 Honda Fit. So just wanted to make sure there will be enough clearance before I buy. Just curious if it will still work with my model? And if so will putting a trailer hitch on my vehicle void my manufacturer warranty? Thanks so much ..... hope to hear from you soon.
asked by: Josh
Expert Reply:
I'll start off by saying that the Magnuson-Moss warranty act that states, in part, that unless the part added actually causes a problem, then installation and use of the part will not void the warranty; so basically, adding a trailer hitch will not void the factory warranty on your vehicle as long as it's not the cause of a malfunction.
With that said, I recommend using the Curt # C11406, which is confirmed on the 2020 Honda Fit-including the Sport models. This hitch will sit below the bumper and has been confirmed by the manufacturer not to interfere with any potential differences in the bumpers between trim packages. Curt hitches have an extremely durable and thick powder coat which helps them withstand the rigors of being attached to the rear of your vehicle over time, so it'll stand up well to nicks and scratches.
To tow a trailer, there are some other parts you'll need like a trailer wiring harness, ball mount and hitch ball. For the wiring I recommend using the Tekonsha T-One # 118767 wiring harness, which offers a plug and play installation. We've found that the Tekonsha harnesses have the most reliable converter boxes over time and will help prevent any feedback from the trailer from damaging the electronics in your vehicle.
For a ball mount you'll want to use something like the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521, which can provide you with either a rise or drop to tow your trailer level and will fit in the above mentioned Curt hitch. You'll also need a hitch pin and clip, which is available with part # F-4. For a hitch ball, you'll need one with a 3/4" shank; if you need a 1-7/8" hitch ball you can use the # A-80 and for a 2" hitch ball you'll want to use the # A-82.
I've linked an installation video of the hitch and some part reviews of the parts mentioned in this answer for you to have a look at, as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Best Bike Racks for Electric Bikes
- Q&A: Can You Use Other Battery for Curt T-Connector Vehicle Wiring Harness On 2018 Ram ProMaster 2500
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Trailer Hitch Installation Tips
- Q&A: How To Use 2" Bike Rack On 2015 Honda Fit
- Q&A: Winch Mounting Plate Needed for Aluma 82 Series Car Hauler Trailer
- Q&A: Hanger Distance Recommendation for Trailer Leaf Spring that Measures 25-1/4 inches
- Q&A: Hitch for a 2019 Ford Mustang Bullitt with Both Active Exhaust and Magneride Suspension
- Q&A: Replacement Parts Available for the RAM Trailer Jack Part # TJD-7000S
- Q&A: Will the Thule Passage 2 Bike Carrier Fit a 2019 Ford Mustang