What Mounting Bolt Pattern Do the 7" Electric Trailer Brakes Mount To
Question:
What is the mounting bolt pattern for the AKEBRK-2? What mounting plate should be used with the AKEBRK-2? What is the amp draw for the AKERK-2? Do you have installation drawings cross section for the AKEBRK-2 when used with a 7 x 1.25 hub AKHD-545-2-2K? Thank you.
asked by: Charles F
Expert Reply:
The Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # AKEBRK-2 mounts to a 4 bolt brake flange and would have a maximum amp draw of roughly 3.2 amps. These brakes do not come with brake mounting hardware so you'd want to use the Mounting Hardware for 7" Brake Assemblies # BRKH7
These brakes are compatible with the # AKHD-545-2-2K you were looking at as well. We don't have technical drawings or a cross section of this but I can tell you that the drums are 2-7/16" wide, which might be helpful.
I've also linked an installation video of the brakes for you to have a look at, that you might find useful.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Mounting Hardware for 7" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 7 Inch
- Redline
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional
- Shop: Trailer Hitch
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Electric Trailer Brake Assembly - 7" - Left Hand - 2,000 lbs
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-2-2K Review
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-2 Review
- Video: etrailer Electric Trailer Brake Kit Installation AKEBRK-2
- Shop: Jacketed 2 Wire (Brake Wire) - 12 Gauge - per Foot
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: brkh7
- Video: Bright Way Push-to-Test Trailer Breakaway Kit Review and Installation 3802308
- Article: Testing Breakaway Systems
- Search Results: hitch
- Video: Deka Jacketed 10 Gauge Wire Installation
- Video: etrailer Trailer Brakes AKEBRK-2L Review
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How To Properly Mount The Side Load Bright Way Breakaway Battery And Box
- Q&A: Breakaway Battery Continually Goes Dead
- Q&A: Power Draw On Tow Vehicle Battery to Charge Hopkins Engager Push-To-Test Trailer Breakaway Battery
- Q&A: Availability of Weld-On Trailer Frame Mounting Plate for Bright Way Breakaway Kit
- Q&A: Best Quality Trailer Breakaway Battery With Charger
- Q&A: Can Bright Way Push-to-Test Trailer Breakaway Kit # 3802346 be Used on Outside of Trailer Frame
- Q&A: Replacement Battery For Bright Way Push-to-Test Trailer Breakaway Kit # 3802346
- Article: REDARC Tow-Pro Liberty vs Tow-Pro Elite
- Video: Redarc Tow-Pro Trailer Brake Controller Plug-and-Play Wiring Harness Review