Installation of Hopkins VueSMART RV Camera System

Question

Question:

VueSMART RV and Trailer Backup Camera - Wireless - Universal Mount - 152-Degree View Item # HM34FR Im wanting to know if this camera needs 12 volt etc. Installation manual would be helpful to see.

asked by: Robert M

0

Expert Reply:

The Hopkins VueSMART RV and Trailer Backup Camera - Wireless - Universal Mount - 152-Degree View # HM34FR does require 12v power. You simply will connect into the tail light/running/clearance light circuit for power. I will send you a link to the instructions to assist.

expert reply by: Jason S

0

Answer 1

Since you don't have to install the VueSMART RV and Trailer Backup Camera #HM34FR behind a clearance light you could install this just above or below your round marker light and it will function fine.

view full answer...

Answer 2

The VueSMART RV and Trailer Backup Camera part #HM34FR is very customizable, it can be adapted to fit any application. I have attached a photo which shows a simple modification that can be made to change the style of mounting bracket. The camera can…

view full answer...

Answer 3

Yes, you can use the VueSMART RV and Trailer Backup Camera part #HM34FR on your 2022 Keystone Cougar 5th Wheel. That said, I looked up some photos of the upper rear center clearance lamps and they are oval, not rectangular like what the above offers…

view full answer...

Answer 4

Good news! I was able to find the 1-1/2 inch 12pt socket with the 3/4 inch drive made of chromium-vanadium steel construction. The part number you are looking for is #ALL643210.

view full answer...

Answer 5

We've got what you're looking for. The Curt Front Mount Hitch Receiver, part #C31028 mounts to the undersides of the frame members at the front of your Jeep so that the receiver opening is located under the front bumper, as you can see in the…

view full answer...

Answer 6

In the galvanizing process, depending on how the manufacturer dries the wheels some of it can pool on one side due to the dipping processed used. That is an issue you are going to run into with many wheel manufacturers. It is an ongoing issue. What I…

view full answer...

Answer 7

The HD versions of the Timbren kits like the part #ASR2KHDS01 are more intended for off road type use like what you'd be using so this is the kit you'd want. The spindles are actually designed for use with 3,500 lb hub/drums instead for added…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 10

In order to install a brake controller on a dump truck you'd first need to start with a 4-way trailer connector and then adapt this to a 7-way so you can hook up a brake controller. I won't have much info for anyone particular dump truck but…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Installation of Hopkins VueSMART RV Camera System

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching