bing tracking image
Q & A Icon

Installing a Redarc Trailer Brake Controller on 2021 Jeep Wrangler with Brake Pedal Sensor  

Question:

I have a 2021 jeep wrangler it has a brake pedal sensor. how do you connect the redarc. brake controller to it. It has three wires

0

Expert Reply:

The Redarc Tow-Pro Elite # RED44FR or the Liberty # RED24FR with harness # RED69FR will install in the same way. If you have the factory tow package, you simply connect harness # 3073-P and then cut the harness matching color for color If you do not have the factory tow package then you will need to test the wires you referenced using a circuit tester like # PTW2993. You will connect the red wire of the harness to the factory wire that only shows power when the brake pedal is pressed.

The black wire of the harness goes to 12v power, the white to ground, and the blue wire is the power output connection that leads to your 7-way connector's 5 o'clock pin. I've attached an installation help article to assist.

expert reply by:
0
Jason S

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.