How to Determine the Correct Replacement Hub and Spindle for a 2007 Snowbear Trailer
Question:
I have a 2007 5 x 10 Snowbear trailer that I need to get 2 hubs and possibly 1 spindle for...question is I dont know what size? Any idea...the one sticker says 2,334# max load. Appreciate any help!
asked by: Mark C
Expert Reply:
In order to determine the correct hubs and spindles used on your trailer you will want to pull one of the hubs and get the inner and outer bearing numbers stamped into the bearings. I will also need to know the bolt pattern required. I have included a couple of links that should help you.
Spindles can be tricky to replace since they are welded to the axle. The removal and installation of a spindle should be performed by a qualified professional with experience working on trailers.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Recommended Replacement Hubs for Harbor Freight Trailer
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Can Jayco Pop Up Trailer with 4 Lug Hubs be Swapped to 5 Lug Hubs
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub for DICO 45264
- Q&A: Replacement Parts and Winch for a Profile 2000 Hand Winch
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Tire Sizing
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub