Recommended Windshield Cover for 2021 Ford F-450

Question

Question:

Looking for a windshield cover for my 2021 Ford E450

asked by: Denny L

0

Expert Reply:

We found that the etrailer 2-in-1 Exterior Windshield and Wiper Blade Cover # e98899 fits better on larger trucks like your 2021 Ford E450. We compared it with a similarly sized windshield cover # 288-06603, and it wasn't so much the size but more of the way the extended side flaps worked with the truck and kept it in place. You can check out the comparison video linked below this page.

Another great feature about this windshield cover is that it is reversible. Use the blue side for the winter snow and the silver cover for the hot summer sun.

expert reply by: Evangeline M

0

Answer 1

Thank you for the photos and that information, and based on those photos, what you will need to do is replace the awning arm altogether. For the 69 inch wall mount, the correct part is the following: - Solera 69" Standard Flat Awning…

view full answer...

Answer 2

Based on the pictures you definitely need the awning support arm #LC281154. I can't tell in that other photo if the pin is bent or damaged, or just barely hanging in there. I'm also not sure if your idler head and roller endcap are ok…

view full answer...

Answer 3

The Adco Deluxe Windshield Cover for Class C Motorhomes #290-2507 is intended specifically for Ford F-Series-based motorhomes. For an E-Series cutaway-based motorhome we do have windshield cover fits shown on the linked page, such as Hopkins…

view full answer...

Answer 4

You are correct that the Jeep bracket should have been reinstalled when installing the Blue Ox Base Plate #BX1139. I have linked another video near the bottom of the page where you can see the brackets being reinstalled on a 2020 Jeep Wrangler around…

view full answer...

Answer 5

I am sorry to hear that you did not receive the instructions for your Brake Buddy Select 3 Portable Supplemental Braking System #HM39524. But yes, there is an online version of the instructions and I have linked them here for you. The Brake Buddy…

view full answer...

Answer 6

We can't recommend you drill into the base plate to mount the breakaway switch as that would void the warranty of the base plate kit. Instead I would recommend mounting the switch to the bumper of the vehicle.

view full answer...

Answer 7

Yes, you will want to remove any rubber floor mat when you're installing the Brake Buddy Select 3 #HM39524. It doesn't say this in the instructions but it's still recommended. I confirmed this with my contact at Hopkins/Brake Buddy.

view full answer...

Answer 8

Yes, The etrailer Snoblock Snow and Ice Windshield Cover #288-06603 will work great as a sun shade. Since it sits on the outside of the windshield, it will essentially keep any sunlight from coming thru the windshield. Keeping your car cool, and…

view full answer...

Answer 9

For as many units of the #288-06603 as we've sold, not one customer has reported any sort of damage to their vehicle door's weatherstripping. So, it's safe to say that unless you plan on leaving the cover on for months and months at a…

view full answer...

Answer 10

To install the Tekonsha Prodigy P3 #90195 on your 2002 Chevy Silverado K3500 you need the Wiring Adapter #3025-P which plugs in under your driver-side dash (see attached install video). If you already have the factory plug at the back then you're…

view full answer...

Recommended Windshield Cover for 2021 Ford F-450

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching