What Bearings Do I Need for a Lippert 4,400 Lbs Trailer Axle?
Question:
2016 Crossroads Sunset Trail 32RL, Lippert 4400# axles. Your site seems to be jumping between the LM67048 and the L44649 bearing. Confused as to which one I actually need. Thanks
asked by: Bob B
Expert Reply:
Lippert is a little funny when it comes to their 4,400 lbs axles. They don't have a true standard 4,400 lbs axle. Instead, they have some that use the same inner and outer bearings as a 3,500 lb axle (# L68149 and # L44649) and some that match the Dexter 4,400 lbs axles which use inner and outer bearings # L68149 and # LM67048.
Anytime I come across one of these axles I always ask to pull the outer bearing out and find the number stamped in the bearing.
The other option is to pull the hub off and measure the spindle and measure the bearing seats on the spindle. If the outer bearing surface on the spindle measures 1 inch, then you will want the # L68149 and # L44649 bearings and if it measures 1.25 inches, then you will want the # L68149 and LM67048 bearings.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: lippert 4400 lb axle
- Search Results: 4400 lbs axle
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Rubber Wiper Seal and Bulb for RV Slide Out - Stick On - 60' Long x 3-3/16" Wide
- Video: Review of Lippert Components Camper Jacks - A-Frame Jack - LC69VR
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Shop: Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs
- Shop: Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Search Results: al ko 4400 lb axle
- Q&A: Wiring Installation of Kwikee Step Control Unit
- Search Results: 5200 lbs axle
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Q&A: Seal With Dimensions to Replace 171255UC
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 68149
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Fifth Wheel Hitch
- Article: Trailer Tire Sizing
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Search Results: 25580
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Shop: Gooseneck Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes