Are Air Bag Capacities Total or Per Side for 2015 Chevy Silverado 1500

Question

Question:

Hi, I have a question about the ratings for suspension leveling/load kits. If a kit is rated for 5000 lbs is that per side? For example: I have a 2015 Silverado 4x4, Tow Rating of 9200 lbs. I am looking at a camper at 6000 lbs empty. So I am thinking something rated in the 7500-8500 lb range but those seem to be for HD trucks. Thanks

asked by: Chris B

1

Helpful Expert Reply:

That's a good question, and the air bag capacity is the total capacity and not per side. Having said that, the capacity is just designed to help support the tongue weight - the weight on the rear axle of your 2015 Chevy Silverado 1500 - so air bags rated at 7,500 lbs on your truck would definitely be overkill, which is why the ones that fit your Chevy are only rated for up to 5,000 lbs.

I really like the Air Lift air bags for your 2015 Chevy Silverado 1500, as they are a high-quality air bag with particularly durable mounting hardware so these are the option I'd go with, and the correct fit for your Chevy depends on your bed size.

- 8 Foot Bed: Air Lift LoadLifter 5000 Air Helper Springs # AL57211

- Short Bed: Air Lift LoadLifter 5000 Air Helper Springs # AL57204

During the installation of these air bags, you are going to want to ensure your air lines are cut perfectly straight, and the best way to do this is by using the Air Hose Cutter # AL10530.

Also, I do highly recommend adding a compressor so you can adjust the air pressure in the bags from the comfort of your truck's cab, and you can get one that is more budget-friendly with an analog gauge, or go with a remote/Bluetooth option for the ultimate in convenience. Either of the following options will be great for your set up:

- Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount # AL25980EZ

- Air Lift Load Controller II Compressor System for Air Helper Springs # AL25592

expert reply by: Kyle S

1

Answer 1

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 3

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 6

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 7

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Are Air Bag Capacities Total or Per Side for 2015 Chevy Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching