Connecting Viking Products Hitch Hoist with 2-1/2" Truck Receiver.

Question

Question:

Do you have a hitch hoist that works with a 2-1/2 inch hitch?

asked by: Don

0

Expert Reply:

The Viking Solutions # 310-VMH001 hitch hoist will easily connect to your truck with a 2-1/2" receiver when you use a Buyers Products # 337RTA252 2-1/2" to 2" Receiver Tube Adapter. I have included a link to this product and a video review.

expert reply by: Les D

0

Answer 1

I believe that you are referring to a 2019 Ram 2500 with the puck system and a short bed. If your Husky slider mounts to industry standard rails (see attached photo with dimensions) then you can use the Reese 5th Wheel Rail Adapter #RP30154 to make…

view full answer...

Answer 2

The Viking Solutions Rack Jack Magnum Hoist - Hitch Mounted - 650 lbs #310-VMH001, the lower mast tube is 2-1/4 x 2-1/4 inches. The receiver tube is 2 x 2 inches. The round support leg tubes are 1-3/4 inches in diameter. I've attached a video of…

view full answer...

Answer 3

According to sketches we've received from Viking Solutions in the past it looks like the outside section of the Rack Jack Magnum Hoist w/ Winch #310-VMH001 sits about 17.1" out from the center of the hitch receiver. Attached is the…

view full answer...

Answer 4

The Viking Solutions Rack Jack Magnum Hoist #310-VMH001 can be completely broken down for storage and will not take up very much space. This will not be an issue with your Deck system and I did include a picture of the part as it will come to you.…

view full answer...

Answer 5

I went out to the warehouse and weighed each component of the Viking Solutions Rack Jack Magnum Hoist part #310-VMH001 for you. The entire weight can vary from unit to unit slightly but it should be around 70 lbs. The individual weights are all…

view full answer...

Answer 6

The B&W Tow and Stow line of ball mounts, including the #BWTS20049B, will be too wide for the Lock N Roll #336VS503 to fit around, so I can say that one is a no go right off the bat. With that out of the way, the #336VS503 will fit in the channel…

view full answer...

Answer 7

I do have an option for you but the Viking Solutions Rack Jack Magnum Hoist part #310-VMH001 won't work for lifting items on a roof, the boom is not long enough to reach this high. I would instead recommend some sort of pulley system like Thule…

view full answer...

Answer 8

The Viking Solutions Rack Jack Magnum Hoist with Winch for 2" Hitches - 650lbs Item #310-VMH001 does come apart easily for quick storage. You can pull the swiveling tube and legs off of the base tube and place each part separately in your…

view full answer...

Answer 9

I attached a picture that has several dimensions of the Viking Solutions Rack Jack Magnum Hoist #310-VMH001. I also spoke with my contact at Viking Solutions and he told me they designed this hoist for fitting a hitch height of around 18 inches. The…

view full answer...

Answer 10

The B&W Companion Sliding Fifth Wheel Trailer Hitch for Ram Prep Package #BWRVK3670 weighs about 300 pounds when fully assembled. The head, part #BWRVC3006, is about 70 pounds and the base, part #BWRVB3670, is about 230 pounds. By the way, sooner…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Connecting Viking Products Hitch Hoist with 2-1/2" Truck Receiver.

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching