Does Blue Ox Base Plate Kit # BX1133 Fit Tow Bar 7335

Question

Question:

Will this base plate work with blue ox #BX 7335 tow bar. Thank you

asked by: Gary W

0

Expert Reply:

Yes the Blue Ox base plate part # BX1133 that you referenced would work great with a Blue Ox Aventa tow bar 7335 like you referenced.

expert reply by: Jameson C

0

Answer 1

Coupler style tow bars are generally preferred as they are easier to store and don't require a ball mount with a hitch ball. They also provide a really solid connection. So based on that I would go with the Blue Ox part #BX7420 as this is a…

view full answer...

Answer 2

Yes, the Blue Ox base plate kit part #BX3321 that you referenced is compatible with the Blue Ox Aventa II BX7335 that you mentioned.

view full answer...

Answer 3

In regards to the Blue Ox Acclaim Tow Bar part #BX4330, the width of the triple-lug connection is just a bit over 2-1/2". In order to use this tow bar on a 1999 Honda CR-V you'll need the Blue Ox Base Plate Kit part #BX2218. If you don't…

view full answer...

Answer 4

You are on the right track. The Blue Ox Base plate kit you need is the part #BX2238 which is confirmed as a fit for your 2006 Honda CR-V. This would work great with the Blue Ox Alpha part #BX7380 which does come with safety cables already. For…

view full answer...

Answer 5

Yes, I will be happy to tell you what you will need to flat tow your 2007 Honda CR-V behind your motorhome. There are 5 major components needed: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates I recommend…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Does Blue Ox Base Plate Kit # BX1133 Fit Tow Bar 7335

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching