Picture of Draw Tite Hitch DT57MR Installed

Question

Question:

When do you think you will have pictures of how this fits the GMC 2500HD? And, will this part # fit the Sierra trim level?

asked by: Jim

0

Expert Reply:

I attached a picture to this page that shows the Draw Tite Hitch part # DT57MR installed for you to check out. I also attached a link to the install instructions for this for you to check out as well. This does fit your 2020 GMC Sierra 2500 as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, it will. I spoke with my rep at EcoHitch and the EcoHitch Front Trailer Hitch item #EH57FR is exactly what you need for your 2024 Silverado 2500 diesel. This hitch is custom fit and and bolts to your truck with included hardware. This front…

view full answer...

Answer 2

To add a front mounted hitch to your 2023 Chevy Silverado 3500. You will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH57FR. This hitch is custom fit and bolts to your Chevy with included hardware. This front mounted hitch has a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Hey Cody, you are installing this B&W Turnoverball #BWGNRK1020 on a 2021 Chevy 2500 correct? If so, the M14 bolts are definitely the correct size. It is possible that the holes in the frame are corroded which is preventing the bolts from…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

There might be a solution but it all comes down to what gooseneck hitch you have installed in your truck. If you can let me know what brand hitch you have I can help find you exactly what type of slider hitch solution would work best. Hopefully you…

view full answer...

Picture of Draw Tite Hitch DT57MR Installed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching