How Tall Are the Rhino-Rack Fishing Rod Carriers

Question

Question:

are these 3 5/8inch tall

asked by: Dan

1

Helpful Expert Reply:

In regards to the Rhino-Rack Fishing Rod Carrier part # RR576F, the 3-5/8" refers to the clearance for bindings like on snowbards which the carrier can also be used for. In other words, it will be the distance from the center of the carrier where the accessories sit to the top of the crossbar. The actual height of the until will be around 6".

expert reply by: Conner L

1

Answer 1

The Rhino Rack Fishing Rod Carrier #RR573F can fit on 2 inch diameter crossbars if you use the Heavy-Duty Crossbar Adapter Kit #HD-FK1. This basically gives you longer bolts for the mounting brackets so they can fit the larger diameter bars.

view full answer...

Answer 2

Yes, the Rhino-Rack Fishing Rod Carrier #RR576F will absolutely fit the 2-3/4 inch wide & 36 inch long crossbars on your 2003 Ford Expedition without any issue. I have added a link to a video review of this carrier for you to check out as…

view full answer...

Answer 3

The internal length of the Rhino-Rack Fishing Rod Carrier #RR573F that you referenced has an internal length of 12-13/16 inches. That means there's 12-13/16 inches of width where it can carry the fishing poles.

view full answer...

Answer 4

You could certainly use a small step stool like the #SASA-10C-G to make it easier to reach the Rhino Rack #RR573F fishing rod holder. The step's 15-1/2 height would definitely help bring things within reach. The option I really like is the…

view full answer...

Answer 5

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 9

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 10

The Rhino-Rack's Locking Fishing Rod Carrier #RR574F is great product that will work wonderfully for your application, you can't go wrong purchasing this product. This has universal mounting hardware that fits all popular roof rack bar…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

Hey Tim! Yes, the Rhino-Rack Ski and Fishing Rod Carrier #RR572 will fit the older Thule square crossbars. While this kit does come with T-Slot hardware, it also has the clamps which is what you'll use for the square crossbars.

view full answer...

How Tall Are the Rhino-Rack Fishing Rod Carriers

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching