Compatible Puck System for 2020 F-350 Without OEM Prep Package

Question

Question:

I just bought a 2020 Ford F-350 short bed without the tow /fifth wheel hitch prep. I was using a Pullrite 2700 auto slider with the 4442 Ford adapter in my 2012 F250 with the OEM puck system. Will this Reese puck system work with the Pullrite 4442 Ford adapter?

asked by: Bryan

0

Expert Reply:

Yes! The Reese Under-Bed Rail and Installation Kit # RP87FR will fit with your Pullrite adapter. What the Reese rails do is essentially give you the Ford puck mounting system. If you used your adapter with the OEM puck system on your old truck, it will be the same experience with the Reese system on your new one.

If you don't already have one, you'll need a wiring harness like the Curt 5th Wheel/Gooseneck Custom Wiring Harness with 7-Pole Connector for Aluminum Beds # C57008.

expert reply by: Evangeline M

0

Answer 1

I believe you're talking about what Reese refers to as inner brackets because they mount to the inner surface of the truck frame. They offer the inner brackets as #RP27FR, as shown in the provided photo.

view full answer...

Answer 2

I can absolutely make a 5th wheel hitch recommendation for your potential 2020 Ford F-250, whether you get it with the factory puck system in the bed or not. Starting with my recommendation for the factory puck setup, I really like the Curt A25 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 11

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 12

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Compatible Puck System for 2020 F-350 Without OEM Prep Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching