What is the Size of the Mounting Holes on Titan Model 10 Brake Actuator 4857220
Question:
Hello, on this brake actuator T4857220, what size are the holes on the 3inch tongue mount portion? The holes for mounting the brake actuator to the tongue. It looks like there are 5 holes total, with 2 different sizes. Thank you,
asked by: Kevin J
0
Expert Reply:
The 3 holes on the tongue mount of the Titan Brake Actuator w/ Electric Lockout # T4857220 are 17/32" in diameter; the larger holes are 21/32" in diameter.
expert reply by:
Erik B
0
click to enlarge
Product Page this Question was Asked From
Dexter Brake Actuator w/ Electric Lockout - Drum - Zinc - 5 Position Adjustable Channel - 12.5K
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 12500 lbs GTW
- Channel Only
- Drum Brakes
- Electric Lockout
- Dexter
more information >
Continue Researching
- Q&A: Are Dexter Model 6 and Demco DA91 Inner Slides the Same Dimensions
- Q&A: Length of 7,500 lb Dexter DX7.5L A-60 Drum Brake Actuator
- Q&A: Replacement Brake Assembly and Oil Seal for Dexter 00828510 Brake Drums
- Q&A: Pintle Hook that Can be Used with Military Trailer M1101/M1102
- Q&A: Can HydraStar Actuator be Submerged Into Water on Boat Trailer
- Q&A: Replacement Titan Surge Brake Actuator for Model 10 Part 3241639
- Q&A: What Oil Should be Used in Dexter Oil Bath Hubs
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: Adding Electric Over Hydraulic Disc Brakes