Does Yakima JayLow Kayak Carrier Fit on Malone EcoLight Sport Trailer

Question

Question:

Im trying to figure out if the square tubing you mount hardware to would accommodate the Yakima Jaylow brackets that I already have. Looks like the yakima will accommodate up to 1.25inch square bars.

asked by: Cody V

0

Expert Reply:

Yes the Yakima Jaylow part # Y04073 that you referenced does fit the bars of the Malone EcoLight Sport Trailer # MAL53FR that you also referenced.

expert reply by: Jameson C

0

Answer 1

Per Malone, the Malone MicroSportXT Trailer - 78" Crossbars - Retractable Tongue - 800 lbs, part #MPG460XT, has crossbars that measure 1 1/4" X 1 1/4". Your Yakima JayLow Kayak Carrier w/ Tie-Downs - J-Style or Post Style - Folding - 1…

view full answer...

Answer 2

The Malone MicroSportXT Trailer - 13' Long - 78" Crossbars - Retractable Tongue - 800 lbs #MPG460XT has crossbars that are 12 inches above the frame. I reached out to the manufacturer and they sent me the attached photo as well as stating…

view full answer...

Answer 3

When using a Malone Megasport Kayak Trailer like #MPG535, you need kayak carriers that can fit around the 1-1/4" square Malone crossbars without T-Tracks. It is possible that your Thule saddles are t-track mounted or its clamps are incompatible…

view full answer...

Answer 4

It really depends on the particular model of Thule kayak carrier you are trying to attach. The Thule Stacker #TH830, for instance, will easily install onto the 1-1/4 inch wide x 1-1/4 inch tall square crossbars of the Malone MicroSportXT Trailer…

view full answer...

Answer 5

The Malone MicroSport Trailer, part #MPG460G, has crossbars that measure 1-1/4" by 1-1/4". The reason the Yakima JayLow Kayak Carrier, part #Y04073, will not stay in place is because they generally aren't meant for such small crossbars.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Does Yakima JayLow Kayak Carrier Fit on Malone EcoLight Sport Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching