Westin Nerf Bar Running Boards Compatible With 2019 Ford Ranger

Question

Question:

Which Wes nerf bar for Wes 56-14155 would fit a 2019 Ford ranger

asked by: Steve D

0

Expert Reply:

For your 2019 Ford Ranger we have Westin Nerf Bars but the fit will be specific to SuperCab or SuperCrew Cab. There is not a fit for the HDX Drop Nerf step you referenced.

If you have a SuperCab, we have a few options:
-Westin R5 Nerf Bars - 5" Wide - Black Powder Coated Aluminum # 28-51285
-Westin PRO TRAXX Oval Nerf Bars - 5" - Polished Stainless Steel # 21-54140
-Westin PRO TRAXX Oval Nerf Bars - 5" - Black Powder Coated Steel # 21-54145
-Westin R5 Nerf Bars - 5" Wide - Polished Stainless Steel # 28-51280
-Westin Grate Step Nerf Bars with Custom Install Kit - 6-1/4" Wide - Black Powder Coated Steel # 27-74715-2265
-Westin PRO TRAXX Oval Nerf Bars - 4" - Polished Stainless Steel # 21-24140

If you have the SuperCrew Cab, then these are options:
-Westin Grate Step Nerf Bars with Custom Install Kit - 6-1/4" Wide - Black Powder Coated Steel # 27-74735-2265
-Westin E-Series Round Nerf Bars - 3" - Polished Stainless Steel # 23-4150
-Westin PRO TRAXX Oval Nerf Bars - 4" - Polished Stainless Steel # W75UR
-Westin E-Series Round Nerf Bars - 3" - Black Powder Coated Steel # 23-4155

expert reply by: Jason S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 3

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 4

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 5

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 6

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 7

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Westin Nerf Bar Running Boards Compatible With 2019 Ford Ranger

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching