Dimensions of the Pro Series 63072 Pintle Hook Mount and Shank
Question:
Hello, Could you tell me what the distance from the hitch pin hole to the back of the plate is on this model? I am in need of a pintle hitch to clear my bumper on a utility truck and need atleast 7 1/2inch from hitch pin to the back of the plate. This hitch will have to be used in the rise position due to the truck height.
asked by: Anthony
Expert Reply:
The Pro Series Adjustable Pintle Hook Mounting Plate for 2" Hitches - 14K lbs # 63072 has a measurement from the front of the mounting plate to the center of the hitch pin hole of 9-11/16 inches. It sounds like you are wanting to know the backing of that front plats which will be at about 3/4 inches shorter. If you are seeking the measurement from the hitch pin hole to the back of the shank for clearance used in the rise position, it is 6-3/4 inches. I've attached a video to help with these measurements. If you want to use this style, you can replace the shank with the Reese Weight Distribution Shank - 16,000 lbs # RP54998 which is longer having that measurement in the rise position of 8 inches. Unfortunately the mount connecting to the shank is not available separately.
An alternative I also recommend is the B&W Pintle Hook Mounting Plate for 2" Hitches - 11" Shank - 8 Hole - 16,000 lbs # BWPMHD14003 which will give you 8 inches from the center of the hitch pin hole to the back of the plate with a support that is angled from 5-1/2 to that 8 inches. This should work well for you.
Products Referenced in This Question
B&W Pintle Hook Mounting Plate for 2" Hitches - 11" Shank - 8 Hole - 16,000 lbs
- Pintle Hitch
- Pintle Mounting Plate
- 16000 lbs GTW
- 2 Inch Hitch Mount
- 8 Holes
- Standard Shank
- B and W
more information >
Reese Weight Distribution Shank - 16,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 7 Inch Rise
- Trunnion - 8 Inch Rise
- Reese
more information >
Continue Researching
- Shop: Curt Pintle Hook for 2" Hitches - 20,000 lbs
- Shop: B&W Pintle Hook Mounting Plate for 2" Hitches - 11" Shank - 8 Hole - 16,000 lbs
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW
- Shop: Gen-Y Torsion Pintle Hook Mounting Plate for 2" Hitches - 14 Hole - 16,000 lbs
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Trailer Hitch
- Video: Review of Titan Brake Actuator - Surge Brake Actuator - T4750100
- Shop: Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 7-1/4" Shank - 14 Hole - 20,000 lbs
- Shop: Curt Pintle Hook - Bolt On - 20,000 lbs
- Article: Gooseneck to 5th Wheel Adapters
- Shop: Suspension Enhancement
- Shop: Gooseneck Hitch
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 44649
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Video: Titan Trailer Brakes T2385200 Review
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Q&A: Trailer Wiring Harness Recommendation for a 1999 Isuzu NPR
- Video: Brake Buddy Classic 3 Portable Supplemental Braking System Installation - 2009 Jeep Wrangler Unlimit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: How to Charge a Dump Trailer Battery
- Video: Aries AdvantEdge Headache Rack Review